AGA-Fixing | Artwork | Cracking | Demos | Emulation | FAQ | Feedback | Games | HD-Installing
History | Home | Icons | Join Us | Links | Memberlist | MFM-Installing | News | Patches | Rob Northen | Utilities
Action's Guide to AGA-Fixing!
Don't you hate it! You upgrade your Amiga to a fancy 1200 or 4000, and a lot of the old software you used to use no longer works! Well there are a number of people out there fixing games, so here is a brief description of what is generally required to get games and demos working:
Please note that this section is called "AGA fixing" and most of the problems will occur with ECS upgraded configurations. 680x0 fixing may be a more suitable name, but that title does not look as nice as the current one! So no complaints please!
Greetings must go to Legionary, N.O.M.A.D, Jean François Fabre, Bert Jahn, Galahad/Fairlight and numerous others for their help in this area. Thanks a lot guys!
In non-EC CPUs such as 68030, 68040, 68060 (not 68000 nor 680EC20), an address is coded in 32 bits, whereas 68000 and 680EC20 only take the 24 lower bits into consideration when accessing memory, for data or instruction fetch.
e.g: on a 68000, if you want to jump to $4000, you can code either of:
jmp $4000 ;the simplest jmp $xx004000 ;xx = anything different from zero ;(the stupidest)
Then, jmp $ff004000 will jump to $4000 (the PC will be equal to $ff004000 but the instuctions will be fetched from $4000 and so on and it won't crash.
Conversely, as real 32 bits CPUs don't mask the most significant byte, the same instruction jmp $ff004000 executed on a 68040 will cause the cpu to fetch the instructions from $FF004000, which will most likely cause a superb crash.
"But the programmers never code jmp $ff004000 instead of jmp $4000", I hear you say. Yes, but they often use address tables (for fast switch/case) like this:
move.l d0,d1 lsl.l #2,d1 lea addresstable,a0 move.l (a0,d1.l),a1 jsr (a1) ;Jump to fetched address move.w #$95,d1 moveq.l #0,d0 addresstable: dc.l $00004000,$00004046,$0000502A,...
A very convenient technique, except if the programmer has the stupid idea to use the unused most significant byte of an address (for instance at location (addresstable)) to store 1 byte data, such as a counter. Then, the JSR will only be correct if the value is 0, else it will crash.
This kind of error is very hard to find, and then you must patch it. It was the cause of the crash of Xenon2 and Z-Out, for instance, but only when a special bonus was taken.
On Agony it was harder to detect, as some enemies cannot be killed on a 68060, even with all caches off. This is still a 24 bit problem.
Once found, you can modify the code as follows:
move.l d0,d1 lsl.l #2,d1 lea addresstable,a0 move.l (a0,d1.l),a1 jsr My24BitPatch NOP moveq.l #0,d0
Add NOPs as you won't have the room for the jsr (6 bytes vs 2 for JSR (A1)) and copy some original code you overwrote:
My24BitPatch: move.l d0,-(a7) ;save d0 move.l a1,-(a7) ;save a1 move.l a1,d0 and.l #$00ffffff,d0 ;filter the MSB (only with data registers) move.l d0,a1 jsr (a1) ;jump move.l (a7)+,a1 ;in case the game uses MSB of a1 (suckers!) move.l (a7)+,d0 ;restore d0 move.w #$95,d0 ;original game code rts ;return
This example was adapted from the Xenon 2 patch by Jean François Fabre.
This is a very frequent problem on the Amiga. You try a game, and the character flashes, or the game crashes after a few seconds, and the screen is corrupt.
In most cases, the game can be played, but the graphic bugs are annoying. One would think the AGA chipset is the cause but it's not. For proof, test the faulty game on an accelerated A2000 and the result is the same.
The problem is that programmers often don't wait for the old blit to finish before starting another. This is no concern on A500/68000 because they know the blits are over due to the terrible speed of the 68000, but when you upgrade to A1200/020 you see the good coders.
Be aware that some blitter problems cannot be detected even on 68060 processors! This is due to the chipmem access speed on certain cards such as the 68060 Blizzard card. It is terribly slow compared to even a standard A1200/020 with caches on or a Blizzard 68030-IV card!
There's also some Bltpri configuration which seems to change behaviour whether setpatch has been run or not.
To find them, you've got to search for write accesses to $dff058 blitter register. It can be found in various flavours in the code:
lea $dff000,a5 ... move.w #$56,($58,a5)
lea $dff048,a6 ... move.w #$56,($10,a6)
As you can see, it can be a real pain in the arse to find these instructions! Once you do find one, search for more identical instructions in the code. This is because programmers are generally lazy and if they get some code working, they will copy and paste it throughout the rest of the program.
To fix blitter problems, you've got to make the CPU wait before or after the blit is performed. It sounds natural that if you wait after, you'll lose CPU cycles since non-blitter related stuff has to wait. This can slow down the game a lot (eg. Mighty Bombjack which performs hundreds of small blits).
If you wait before the blit, non-blitter code will be able to execute in parallel with the DMA blit, and the CPU will wait only in the case the old blit is not over when you reach the new blit instruction. This synchronization is necessary between the CPU and Blitter.
To wait for blitter operation to complete:
btst #6,$dff002 ;dmaconr wait: btst #6,$dff002 ;test twice to fix old bug beq.b wait ;wait until blitter DMA is over <make the blit>
If you have the graphics library open, it is safer to call the WaitBlit() function than code your own - this should be guaranteed to work for all processors. Unfortunately, most games hit the hardware directly so you usually have to insert the code above anyway :(
On some dodgy graphics cards, the screen display will appear corrupt if the programmer has not set the colour bit in BplCon0 ($dff100):
Bit 1: ERSY: External sync. This line is reset on power up (1 = external, 0 = internal) Bit 2: LACE: Interlace enable. This line is reset on power up (1 = interlaced) Bit 3: LPEN: Light pen enable. This line is reset on power up (1 = enabled) Bits 4-7: Unused Bit 8: GAUD: Genlock audio enable (1 = enabled) Bit 9: COLOUR: Composite video colour enable (1 = colour, 0 = black and white) Bit 10: DBLPF: Double (dual) playfield mode (1 = dual playfield) Bit 11: HOMOD: Hold-and-modify mode (1 = HAM) Bits 12-14: BPU: Bitplanes used Bit 15: HIRES: High resolution mode (1 = high resolution, 0 = low resolution)
On Amiga 1000's with colour composite output, you can set this bit equal to 0 to output a monochrome display through the composite video port. This bit has no affect on the RGB output.
To fix can either be very easy, or a real nightmare! Sometimes you will get lucky and find the early game setup does something like this:
move.w #$4000,$dff100 ;Setup a 16 colour screen
Set bit 9 to fix it, which is the same as adding $200 in the previous example:
move.w #$4200,$dff100 ;16 colour screen with colour bit set
Sometimes the game will write the value all through it so you have to manually find them all, and other games copy the value from a table and insert it into a copperlist on the fly (sometimes an easy fix, other times very difficult). A MMU combined with WHDLoad comes in very handy for this task!
The CPU caches cause a lot of problems on older software. Self modifying code and CPU delay loops all fail on anything above a 68020. Turning off the caches helps the software to run correctly.
To make software run faster, turn on the caches. Remember the data cache is not enabled on an Amiga 4000/030/040 until the setpatch command has run.
Programmers should use the CacheClearU() or CacheClearE() routines on KS36+ machines.
All processors of the 68K family have a prefetch feature. The processor assumes that the code will be executed without break of sequence, so it prefetches the instructions to avoid memory accesses, and this feature cannot be disabled, unlike the cache feature which can be controlled. So disabling the caches will not solve all the self-modifying code problems.
On a 68000, this code will work properly:
move.b #1,moveinst+2 nop moveinst: move.b #0,D0 ...
The value in D0 will be 1 (self-modifying code).
On a 68020 this still seems to work, at least the first time, and all the time if you disable the instruction cache.
On a 68060, this code will not work (D0 will be equal to 0!!) whether the caches are on or off. This can be harmless but can also lead to strange behaviour if the instruction dynamically modified is a branch!
In this case there's no other way than patching the code 'by hand', by breaking the instruction flow (e.g by a TRAP or a BSR.B).
Hint: Coders insert NOPs in the code like the example above to be sure prefetch will be knocked out on a 68000. Search for NOPs in the code, and you'll be surprised to find interesting things like CPU dependent loops, prefetch and cracked software :)
Most of the Readysoft games have the equivalent of this routine in their bootblock:
lea _Fetch(pc),a0 ... _Fetch clr.l (a0)+ ;2 bytes (long word aligned) addq.l #8,d0 ;2 bytes
All Amigas will fetch both instructions in one hit, even though both lines of code will be eliminated. However, a number of emulators (eg. Fellow) will wipe out the 2nd instruction and cause the add line to be interpreted as something else, eventually causing the game to crash. Hence, no uncracked Readysoft games will work on emulators! (There are many more problems aswell, sigh!)
Sometimes you have to wonder how people who write software ever managed to create a program which runs. Check out the following code from an old Oracle intro:
move.l #4,a0 move.l (a0),a0 move.l (a0),a6 ...proceed to use a6 as GfxBase...
How often will GfxBase happen to be the 2nd library down the chain? Another classic example is from the game Final Blow, cracked by Crystal. Their intro is a standard AmigaDos executable program and the bootblock decides to load it at $40000 and then jsr $40000. Slight problem. The AmigaDos hunks are the first $20 odd bytes. It's a miracle this code ever ran at all!
Surprisingly enough, most games will not work on non 68000 computers due to shitty disk based protection and dodgy loaders! Often the game itself is reasonably well written and would have worked had the disk format been standard. For example, Rob Northen Copylock v1.0 fails on anything higher than a 68010, so many old (original) games will not work!
Remove the protection and you will often get the game working! Contact your local cracker!
You will often find badly written programs use small CPU loops to delay parts of the program. For example, when you press a key on the Amiga, you have to wait 75 µs before acknowledging the keypress. Failure to do so will eventually cause the keyboard to stop working.
A typical game does the following:
_MusicDelay movem.l d0-d1,-(sp) moveq #8-1,d1 bra _int2w1_MusicDelay movem.l d0-d1,-(sp) moveq #8-1,d1 bra _int2w1 _KeybdDelay movem.l d0-d1,-(sp) moveq #3-1,d1 ;wait because handshake min 75 µs _int2w1 move.b (_custom+vhposr),d0 .int2w2 cmp.b (_custom+vhposr),d0 ;one line is 63.5 µs beq .int2w2 dbf d1,_int2w1 movem.l (sp)+,d0-d1 rts
A problem encountered sometimes is a faulty chip memory detection because of the "unexpected" fact that AGA amigas have got 2MB of chip memory. (Programmers should not assume anything about memory on a computer but often do!)
Some games try to find fast memory at $200000:
move.l #$aaaaaaaa,$200000 ;Poke in $200000 cmp.l #$aaaaaaaa,$200000 ;Re-read to check valid address bne NoFastAt200000 ...
This detection works provided the chipmem size does not exceed 1Mb ($0 to $FFFFF). With an AGA Amiga like the A1200, chip memory can be found from $0 to $1FFFFF.
When you poke in $200000 on a A1200 without fastmem at $200000, there is a mirror effect and the write address is decoded as $0. So, the re-read is OK, and the game trusts that there is at least 512K of memory from $200000 to $27FFFF. It actually stores the data from $0 to $7FFFF and it crashes very efficiently, as program code and stack are in that zone 99% of the time.
The "safe" thing to do would have been:
move.l #0,$0 move.l #$aaaaaaaa,$200000 ;Poke in $200000 cmp.l #$aaaaaaaa,$200000 ;Re-read to check valid address bne NoFastAt200000 cmp.l $0,$200000 ;Test the mirror effect beq NoFastAt200000
The mirror or modulo effect is detected. This error was found and corrected by Jean François Fabre in Lotus Turbo Challenge 2 and 3, from Gremlin.
Some games work fine until you press a key. Then it freezes and you're forced to reboot. But the music is still playing, and some animation can continue!
That sounds strange and it is! Keyboard interrupts have got a priority level of 2, while VBL interrupts (often used by tracker routines) have a level of 3. Which explains that the music can continue playing. The keyboard interrupt was not acknowledged, and it happens all the time. The program can't continue. Only higher interrupts can run.
This is often caused by an acknowledge too soon before the rte:
KbInt: move.w #8,$dff09c ;Acknowledge interrupt ... ... rte
Moving the acknowledge instruction just before the rte can be enough. If this does not work, try replacing #8 by #$7FFF.
Interrupt 3 can behave the same way too. Use the same solution (try #$70 before trying #$7FFF).
These problems were noticed (and fixed) in Ninja Spirit, R-Type 2 and Z-Out!
Keyboard routines are usually setup to run from the level 2 interrupt. When a keypress is detected, the level 2 interrupt is fired. Between detecting the key and acknowledging the keypress, there needs to be a time delay. The ways to achieve this are (ranked from best to worst):
The CIA timer is virtually never used in (older) games, and the raster positioning method is hardly ever found. Most games resort to a stupid loop like this between detecting and acknowledging the keypress:
move.b $bfec01,d0 ; Keypress not.b d0 ror.b #1,d0 ; d0 now contains the raw key dump moveq #36,d1 loop dbf d1,loop ; Stupid loop
The problem with this is that faster CPU's make the loop almost non existant, and the keypress is not acknowledged. The computer then locks up. The easiest fix is to steal 6 bytes from the code, and insert a jsr to some patch code which has a working delay:
lea .KBFix(pc),a0 ;Your keyboard fix routine move.w #$4e79,dumb ;Insert JSR move.l a0,loop ... .KBFix movem.l d0-d1/a0,-(sp) ;Horizontal raster timing code lea (_custom+vhposr),a0 moveq #3-1,d0 ;Wait because handshake min 75µs .1 move.b (a0),d1 .2 cmp.b (a0),d1 ;One line is 63.5µs beq.b .2 dbf d0,.1 ;Min=127µs Max=190.5µs movem.l (sp)+,d0-d1/a0 .RTS rts ;Back to original code
The following movem command yields different results when run on a 68000/010 and a 68020/030/040/060:
There is a difference if the register used in predecrement mode is also contained in the register list. For the 68020, 68030 and 68040 the value written to memory is the initial register value decemented by the size of the operation. The 68000 and 68010 write the initial register value (not decremented).
Because this type of construction is not very useful, no problems to existing software are known.
The MoveP (Move to/from Peripheral) instruction moves word or longword data between a data register and alternate bytes of memory. This instruction is intended to interface to 8-bit peripherals connected to either the high byte or the low byte of the data bus. The only time it will save you much work is when you have a peripheral device, for example a math processor, with a multiple-byte internal register that's memory mapped externally. In other words, not too often.
The memory address is specified using address register indirect with displacement notation.
movep Dn,d(An) ;Assembler syntax movep D(An),Dn movep.l d0,0(a0) ;Opcode $01c80000 movep.w 0(a0),d0 ;Opcode $01080000
You maybe wondering why we care about this instruction. The reason is the 68060 no longer has this instruction, so any software which uses it crashes on these CPU's! However, fixing it is pretty easy, here are a few examples:
In the game E-Motion from The Assembly Line:
To fix this, you need to change the instruction to run the following code:
move.b (-1,a1),d0 lsl.w #8,d0 move.b (1,a1),d0
In the game Speedball 2, the following code is found:
move.l (a0)+,d0 movep.l d0,(1,a1) move.l (a0)+,d0 movep.l d0,(9,a1)
To fix this, you need to change the code to:
move.l (a0),d0 ;Not really needed move.b (a0)+,(1,a1) move.b (a0)+,(3,a1) move.b (a0)+,(5,a1) move.b (a0)+,(7,a1) move.l (a0),d0 move.b (a0)+,(9,a1) move.b (a0)+,(11,a1) move.b (a0)+,(13,a1) move.b (a0)+,(15,a1)
The first and 5th lines of fix code are not strictly necessary as the game proceeds to destroy d0 anyway, but the above code is at least a perfect emulation of the 4 lines of original instructions.
The movep command does not affect any condition flags, and is usually 4 bytes long, so you cannot simply put a jsr routine over the top of the code as that requires 6 bytes. You may need to use traps, a 16 bit displacement jsr or modifying the previous or following instruction to steal the extra 2 bytes you need.
This is a major problem found in a surprisingly large number of games, including several reasonably new ones. Basically the programmers write code which modifies itself while it is running. As more efficient CPU's came out, they had caches on them which store the last few instructions executed. When the code modified itself, it modified only the copy in memory and not the one in the cache. The next few instructions in the cache will be rubbish because the game expected to decrypt the next few instructions. Shortly after the game will crash!
In the old days, crackers just used to save the decrypted file over the game and make it jump into the code partway through it. That way the decryption phase has already happened and the code will run on all CPU's. The more elegant way to fix this is to emulate the decryption instructions yourself which operate on the data in real memory and once it has fully decrypted you can clear the cache and execute the game code.
The stackframes created by the processor on interrupts and exceptions are different for the members of the 68k family. On the 68000 a stackframe is 6 bytes, except on Bus and Address Error. The stackframe contains first the saved SR at (a7) and the saved PC at (2,a7). On all other processors (68010+) the minimal stackframe is 8 bytes and additionally contains the vector number as word at (6,a7). This Four-Word stackframe format $0 is created for "Trap #xx" and Interrupts on 68010-68060. The stackframes on other exceptions are different on each processor.
The RTE instruction works differently on the 68000 against 68010+. On a 68000 it simply writes the SR and PC back and continues program execution at the interrupted address. On the 68010+ it additionally frees the stackframe depending on the stackframe format.
Some programs push an address (PC) and a SR and then execute an RTE instruction. This works on a 68000 only, but on 68010+ this will have undefinable results.
For example, the Ben Daglish music replay routine creates a stack frame and calls rte. This was probably seen in it's day as some nice code as it sets the SR back to the what it was originally and returns back to the code. However, this code bombs on 68010+ processors:
lea $dff000,a6 move.w sr,-(sp) ;Save SR onto the stack ori.w #$700,sr ... move.w #2,6(a1) rte
The code above originally worked because the game already had the return address on the stack, so by placing the SR also on the stack, it created a valid 68000 stackframe. The easiest fix for this code is to nop out the SR code and change the rte to an rts:
lea $dff000,a6 nop ;move.w sr,-(sp) nop ;ori.w #$700,sr nop ... move.w #2,6(a1) rts ;rte
You could also fix it with the following code:
lea $dff000,a6 move.w sr,-(sp) ori.w #$700,sr ... move.w #2,6(a1) move.w (sp)+,sr ;Restore the SR rts ;RTS instead of RTE
You can search for the opcodes $40e7007c700 to detect the Ben Daglish replayer. The bug exists in Artura, Axel's Magic Hammer, Deflektor, Federation of Free Traders, H.A.T.E., Super Cars, Switchblade and probably many more!
If a program contains dodgy stack frame code, you have to emulate it. Sometimes it may be enough to replace the rte with an rtr.
Another way is to make the stackframe independent from the type of processor by using a TRAP (the JSR equivalent of RTE).
Some games insert strange values into the status register which cause the game to crash on non 68000 machines. For example, in the game Defender 2 by Jeff Minter/Arc, the following code was found:
move.w #$78ff,sr ;Crashes on most CPU's
Try inserting "normal" values for the SR if you find problems. In this case, a normal supervisor mode value of $2000 does the trick and allows the game to run:
move.w #$2000,sr ;SR fixed!
All 680x0 machines have a 1K "exception table" starting at address $0 when the machine first boots. This can subsequently be moved into another area on 010's and higher using the Vector Base Register (VBR) and a simple copy loop.
Assuming it's located at $0, then $0 - $ff is where the main action's at, on all 68k machines. The address range $100 - $3ff is reserved by Motorola for "user vectors". This address space is unused on the Amiga, but might be used on other machines. The point is that $0 - $ff are the important vectors on all 68k machines, and $100 - $3ff *might* also be used, or then again, might not be.
Some games rely on some values in ROM to work properly. For example, the great game "Gods" works OK from OS1.3 to OS3.0, but fails on OS3.1 on the same computer! It works OK with a softkicked OS3.0, but fails with a OS3.1 chip!)
The solution: the game reads in $FFxxxx (I don't remember now) and I really don't know why. By luck, it worked until OS3.0 but the game seems not to like the values returned by OS3.1!
Some other games even call ROM addresses directly (Gravity Force) or poke in non documented exec strucures, copperlists...
A possible explanation of those accesses in non-DOS games is a protection against hardware freezers like Action Replay or Nordic Power.
Another example: There is a check in $F00000 for the value $1111 in the game Pinball Dreams, maybe to detect such a device but:
If you find routines looking like this, remove them, or it may cause problems to other users of your patches. For the moment, the solution is:
Site updated: 28/8/2005 ©1997-2005 Codetapper/Action! All rights reserved.